This compact ball camera serves as an add-on module for the CAM 440 basic set. It simply connects to the prepared harness of the CAM 440 and offers the same functionality: rear view of the area close to the vehicle, or zoomed far view. You can install it on the lower rear to observe critical areas hidden under a bike rack or tail lift, or on the side for safer driving on narrow roads or gateways.
Serves as a second camera on the rear, on the side or inside a vehicle or trailer
Simply connects to the prepared harness of the CAM 440 basic set
Close view and far view integrated in a single camera lens
Observe hidden areas, e.g. around bike racks and tail lifts, or inside the vehicle
Small ball camera, just 36 mm in diameter, with concealed cables and mounts
Video format selection enables high-resolution images on AHD and CVBS monitors
Latest generation sensor technology allows excellent visibility in the dark
Well-protected in dusty environments – no mechanical lens cover required
Compatible with all commonly used monitors – Dometic as well as other brands
9620006605
CAM440
CAM440E
Camera, installation material, manual
Dual-vision camera for system upgrading
53
36
36
0.07
12/24
IP69K
Black
ECE R10
7315091493734
Close-range view while reversing, far-range view while driving – the dual-function lens of the CAM 440 (CAM 440E) supports both. You can even switch between the two viewing modes without shifting gears, so you can always see what matters in the situation. To benefit from this extended functionality, you need the CAM 440CS control switch (to be ordered separately).
The unique modular design of the Dometic PerfectView CAM 440 allows many application options. The CAM 440 basic set is equipped with a small ball-shaped camera which provides a rear and far view feature activated by the rear gear trigger. Using the CAM 440CS control switch (sold separately) you can conveniently switch between the rear and far view mode to individually observe the area behind the vehicle. A very useful addition is the CAM 440E, which can be installed, for example, as a second camera on the lower rear to observe areas hidden under a bike rack or tail lift. The add-on camera can also be installed on the side to serve as a turn assistant, or for monitoring work tools on commercial vehicles. RVers may like the option of having a camera fitted underneath the vehicle to facilitate waste water discharge at the campsite. Dometic monitors provide up to 4 camera inputs and thus enable the video system to be expanded by other Dometic camera models.